|
|
|
Who's Online
There currently are 5174 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
;
Purchased the manual that I was looking for at a great price and could download it easily.. Great service experience and for future purchases I plan to use the site.
Thank you very much
1-6. Removal of Cylinder Unit
1. Remove the Mechanism Unit. Refer to item 1-5. 2. Unscrew a screw (A). 3. Unscrew the 2 screws (B) and remove the T1 Guide.
(a) T1Guide Screws (B) Screw (A)
Screws (A)
Connector (B)
4. Disconnect a connector (C) which is connected to the Mech. I/F Board on the Mechanism bottom side. 5. Unscrew the 3 screws (D) which have spring, then remove the Cylinder Unit without touching any Mechanism parts.
Notes: 1. When remove the Power Supply Unit, the connector (a) which is connected to the Mother Board and Power Supply Unit is disconnected. 2. Check the connector has been connected securely.
1-8. Removal of Fan Motor
1. Unscrew the 6 screws (A) and remove the Rear Jack Panel.
Screws (B)
Screws (A)
(a)
Connectors (C)
Screws (D)
2. Disconnect a connector P2 (C) 3. Unscrew the 2 screws (B) and remove the Fan Motor.
1-7. Removal of Power Supply Unit
1. Unscrew the 4 screws (A) and lift-up the Power Supply Unit. 2. Disconnect a connector (B) and remove the Power Supply Unit. Connector P2 (C)
Notes: 1. When remove the Rear Jack Panel, the connector (a) which is connected to the Mother Board and Rear Jack Panel is disconnected. 2. Check the connector has been connected securely. DIS-3
|
|
|
> |
|
