|
|
|
Who's Online
There currently are 5943 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Setup (Initial Settings)
How to protect the menus
Opening the setup menus can be prevented even when the MENU switch on the front panel is set to the SET position by setting the unit to the menu protect mode.
5
Set the MENU switch to the OFF position. The unit is set to the menu protect mode. Now, even if the MENU switch is set to the SET position, the menu setting mode will not be established, and �MENU PROTECTED� will appear on the video monitor screen. <Note> If, during the menu protect mode setting, the MENU switch is set to the SET position while holding down the METER button on the front panel, the menu setting mode will be established and the regular menu settings can be performed. Perform steps 2 through 7 of �Setting method using on-screen menus.� (See page 40)
1 2
Set the MENU switch to the SET position. The unit is now set to the menu setting mode, and the menu screen appears on the video monitor. Press the RESET button. The unit is set to the default setting mode, and the default setting screen appears on the video monitor. SELECT 0 1 2 3 MODE ESCAPE LOAD SAVE PROTECT
How to release the menu protection
1 3
Press the MENU-UP button or MENU-DOWN button to move the cursor to the PROTECT position, and press the SET button. The unit is set to the menu protect setting mode, and a screen for verifying whether to protect the setup menus appears on the video monitor. MENU PROTECT OK? NO YES
Set the MENU switch to the SET position while holding down the METER button on the front panel. The unit is set to the menu setting mode, and the menu screen appears on the video monitor.
2
Perform steps
2 and 3 of �How to protect the
menus� above. The screen for verifying whether to protect the setup menus appears on the video monitor. MENU PROTECT OK? NO YES
4
Press the MENU-UP button or MENU-DOWN button to move the cursor to the YES position, and press the SET button. The menu screen is now displayed.
3
Press the MENU-UP button or MENU-DOWN button to move the cursor to the NO position, and press the SET button. The menu protection is now released.
43
|
|
|
> |
|
