PANASONIC AJSPX800
Owner's Manual

When Using the Unislot® Wireless Receiver

5-5

Mounting the Camera on a Tripod

1

Remove the cover to insert the wireless receiver and secure it with the screws.

When mounting the camera on a tripod, use the tripod attachment supplied with the camera.

1

Mount the tripod attachment on the tripod.
Tripod Attachment

Pan head

2

Set the AUDIO IN switch to [W.L.] depending on the audio channel to be recorded.

<Note>

5-4-3

When Using Audio Devices

1 2 3

Connect the audio device to the AUDIO IN jack with the XLR cable. Set the AUDIO IN switch to [REAR] for the channel to which the XLR cable is connected. Set the LINE/MIC/+48V selector switch on the rear panel to [LINE].

2

Select an appropriate hole in the attachment, taking into account the center of gravity of the camera and tripod attachment combined. Also, make sure that the diameter of the selected hole matches the diameter of the pan head screw. Mount the camera on the tripod attachment. Slide the camera forward along the grooves until you hear a �click�.

LINE/MIC/+48V Selector Switch

Removing the Camera from the Tripod Attachment
Tripod Attachment

AUDIO IN Jack AUDIO IN Switch

Red Lever

Black Lever

While holding the red lever down, move the black lever in the direction of the arrow, and slide the camera backward to remove it.

<Note>
If the tripod attachment pin does not return to its original position after the camera has been removed, hold the red lever down and move the black lever in the direction of the arrow again, in order to return the pin to its original position. Please note that the camera cannot be mounted if the pin remains in the center.

72