Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 14 (click to view)
Operation Procedure
1 Turn on the power of each equipment. 5 Adjust the black balance. � This adjustment is needed when the 2 Properly adjust the light for the obcamera is used for the first time or afject.
3 Adjust the flange back of the lens, the
iris and the focus. � Flange back must be adjusted when the camera is used for the first time or after replacement of the lens.
ter leaving unused for a long time. � The adjustment is necessary when the ambient temperature is greatly changed or at the change of season. � After adjusting the black balance once, re-adjustment is not needed under the same condition.
4 Adjust the white balance.
� This adjustment is needed when the camera is used for the first time or after leaving unused for a long time. � The adjustment is necessary when the lighting condition or brightness is changed. � After adjusting the white balance once, re-adjustment is not needed under the same condition.
6 Start shooting.
(After shooting, be sure to turn off the power of each equipment connected.)
