Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Text excerpt from page 6 (click to view)
Display mode settings
One of following three modes can be selected for the SVGA card. XGA : 1024 a 768 dots SVGA : 800 a 600 dots VGA : 640 a 480 dots The SVGA mode is the factory setting. Since the display mode is set inside the SVGA card, the card must first removed from the camera in order for the mode to be set. Switch SW1 is located on the printed circuit board of the SVGA card. To set the desired display mode, set switches #7 and #8 to the positions shown in the figure on the right.
70
XGA
SVGA
VGA
7
7
8
1
2
6
7
Do not touch switches #1 to #6.
8
Set switches #7 and #8 to the desired display mode.
<Note>
N
O
The number of pixels with the AW-E600 is 768 a 494. Through use of interpolation, the camera�s video signals can be converted into 3 display resolution modes.
5
