I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
Text excerpt from page 2 (click to view)
Install the Camera Cover. 1
Put the camera cover over the main unit and hook the 2 tabs of the camera cover to each hole in the plate.
Hole
2
Fasten the camera cover by turning it to the right.
3
Attach the 2 caps to lock the cover to the mounting bracket of the camera.
Note
Tab Confirm that the 2 tabs are fit to each hole in the plate by watching through the openings. After the installation, dust, dirt or insects may get into the camera cover. Remove them by regularly removing the camera cover.
I Removing the Camera Cover Insert a flat head screw driver into the groove and remove the caps, this will unlock the camera cover from the mounting bracket of the camera. Groove
I Wiring Without Making Holes in the Ceiling Remove the notch from the camera cover and pass the wires through the hole.
Dimension (WHD) Specifications About 169 mm (6 5/8 inches) � 154 mm (6 1/16 inches) � 169 mm (6 5/8 inches)