|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Main Menu (continued)
INPUT SELECT
The underlined values are factory preset setting values. Sub menu VIDEO / Y/C Settings <AUTO> <NTSC> <PAL> <75> <00> Explanation Used to select the input format for VIDEO and Y/C input. *1 <AUTO> Either NTSC or PAL is automatically selected. <NTSC> NTSC <PAL> PAL Selects the NTSC setup level. <75> Select this when using with a setup signal of 7.5 IRE. (The inner parts of the monitor are set to the 7.5 IRE setup level to suit the black level) <00> Select this when there is no setup level signal. Selects either YPBPR (Component) or RGB input mode. <YPBPR> Selects the YPBPR signal. <RGB-VIDEO>Selects the video RGB signal. <RGB-COMP .>Selects the PC RGB signal. Selects YPBPR (Component) signal input level. <SMPTE> When the signal level specified in SMPTE is Chroma 100 IRE PB, PR = 0.7 Vp-p. <B75> Select this when connecting a betacam or simliar devices set to 7.5 IRE. (The inner parts of the monitor are set at 7.5 IRE setup level to suit the black level) <B00> Select this when connecting a betacam or similar devices that are not setup to the IRE level. Selects the SYNC when using RGB-VIDEO input. <G-ON> Select when a synchronizing signal is superimposed on the G signal. <EXT> Select when an external synchronizing signal is received in synchronization. Performs analog PC settings. (Refer to �COMP.� below)
NTSC SETUP
YPBPR/RGB
<YPBPR> <RGB-VIDEO> <RGB-COMP.> <SMPTE> <B75> <B00>
COMPONENT LEVEL
RGB SYNC
<G-ON> <EXT>
COMP.
*1 �AUTO� is set when the monitor is shipped from the factory, but if there are concerns about noise etc. from outside the input signal, we recommend assigning specific format. g COMP. The following menus are switched by selecting �RGB-COMP.� in �YPBPR/RGB� in the �INPUT SELECT� menu. The underlined values are factory preset setting values. Sub menu Settings AUTOSETUP*1 Explanation Screen automatic adjustment is performed when �RGBCOMP.� is selected in �YPBPR/RGB� in the �INPUT SELECT� menu. �AUTOSETUP� is performed if a different screen is displayed, and �YES� is selected. Used to adjust the picture display position in the horizontal direction. *2 Used to adjust the picture display position in the vertical direction. *2 Used to adjust the clock phase with 1/32 clock phases. *2
H POSITION V POSITION PHASE
<0�60> (Factory preset settings: 30) <0�60> (Factory preset settings: 30) <0�31> (Factory preset settings: page E-21) <700�1800> (Factory preset settings: page E-21) <XGA> <WXGA>
CLOCK
Used to adjust the sampling clock in dot units. *2
WXGA/XGA
Switches between WXGA and XGA.
*1 �EXECUTING� is displayed while �AUTOSETUP� is being executed, and �COMPLETE� is displayed when �AUTOSETUP� is completed. If �AUTOSETUP� cannot be completed, �INCOMPLETE� is displayed. *2 Each RGB-COMP. input compatible format can be adjusted.
E-20
ENGLISH
|
|
|
> |
|