perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 3 (click to view)
E N G L I S H 5
General
1 Power
Turn the key in the ignition until the accessory indicator lights.
ACC ON
Clock Basics
Volume
[VOL "]: Up [VOL #]: Down Setting range: 0 to 40 The 12-hour system is used for the clock.
E N G L I S H 6
Initial Time
1 Press
DISPLAY /[DISP] (display).
� Power on
Press the touch panel on the main unit. Press [PWR] (SOURCE) on the remote control unit.
(Clock display) Note: � The sound level for each source is stored in memory. (There is one volume setting for AM radio band, and one volume setting for FM radio band.)
� Power off
1 second.
Press and hold SOURCE on the main unit again for more than
2 Press and hold
DISPLAY /[DISP] (display) for
SOURCE
more than 2 seconds. (Hours blink.)
Press and hold [PWR] (SOURCE) on the remote control unit again for more than 1 second. Note: � After turning off the ignition key, a security message is displayed, and the panel removable alarm that reminds you to take the panel is activated. (When security function is set to on � page 38) � Operations can be performed no matter which part of the touch panel is pressed BUT ONLY WHEN THE POWER IS ON.
Touch panel (Power on)
3 Press
or
/["] or [#]. (Hours set.)
Mute/Attenuation
ON: Press MUTE /[MUTE]. ( on indicator lights.) OFF: Press MUTE /[MUTE] again. : No sound.
4 Press
DISPLAY /[DISP] (display).
SOURCE DISPLAY (Power off)
[OPEN]
: Decrease the volume to 1/10. Decreasing volume range depends on setting. (� page 38)
(Minutes blink.)
OPEN
MOSFET
5 Press
or
/["] or [#]. (Minutes set.)
50W X 4
MENU
VOL
BAND
on
APM/ ;/ 1
[VOL "] [VOL #] (Volume)
(Hour/minute)
Open/Close the Front Panel
OPEN: Press [OPEN] on the front panel. CLOSE: Raise the panel by hand.
6 Press
Note:
DISPLAY /[DISP] (display).
(End.)
2
Source
Press SOURCE /(SOURCE) to change the source. Radio
ST
� Press and hold or /["] or [#] to change numbers rapidly. � You can select the clock display during the unit off. (� page 38) Close
CD player (When a CD is in the player.) CD changer control [PWR] (SOURCE)
SOURCE PWR BAND RETURN RET MENU
Time Reset
Press and hold DISPLAY /[DISP] (display) for more than 2 seconds to activate the time setting mode to reset the time. Then, repeat steps 3 to 6.
FACE
S�A DIMMER
[DISP] (When a CD changer is connected and magazine is in (Display) the changer.) ( page 28)
["] [#] (Hour/minute) ["] [#]
VOL
DISP
DIM
1
2
3
4
RANDOM
5
SCAN
6
REPEAT
7
8
9
VOL (Volume) [MUTE]
Caution: � To avoid damaging the front panel, do not push it down or place objects on it while it is open. � Do not pitch your �nger or hand in the front panel. � Do not insert foreign matter into the disc slot.