This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 14 (click to view)
No. Adjustment Adjustment Test Point Adjustment Method / Item / Point 3 Test Mode Remote Setting The following adjustment items (4) to (14) Controller Menu should be adjusted in test mode.
1. Depress the TEST button of remote-controller over 2 sec. to set in test mode. 2. Select a desired adjustment item by up or down button, and depress ENTER button to decide, at shown in below. / (During the setting menu screen, the unit is changed to VTR1 mode.) 3. In test mode, 2 items of VIDEO test mode and AUDIO test mode. 4. Apply the video signal into VTR1 IN terminal. 5. In case of remote-controller built in FUNCTION button, depress the button to switch adjustment item in order.
Remarks
4 CHROMA VCO
Remote Screen Controller
Adjust the remote controller so that the color Color Bar Signal bar is displayed correctly. / (Set center of 3 Generator / Chroma colored points for adjustment point.) Signal : ON / Level : 75% Color Bar Sinal Generator / Chroma Signal : OFF Level : 100% the trigger at Ntes:
1. Waveform should adjusted in center
5 BRIGHT
Remote TP906 (G) / Adjust the remote-controller so that Controller TP904 BP(Black Level Positive) is 0.75V. (VCOM) / TP908 (VGND)
