|
Who's Online
There currently are 5879 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
;
GOOD SERVICE MANUAL.I ALWAYS BUY THERE IF I FIND WHAT I AM LOKING
;
Good quality (clearly readable) manual, I'm glad I could find it here, at a bargain price!
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
1.2.2.
INITIAL SETTINGS:
When you replace the Main PCB be sure to perform the initial settings after achieving the Adjustment, by ordering the following procedure in accordance with model suffix. · Step 1. The temporary cancellation of factory setting: Set the shutter speed dial to � 8 �. While keep pressing AFL/AEL Press the � Playback Press FUNC.2 , then turn the Power on. · Step 2. The cancellation of factory setting: � button to playback mode. and � UP of Cursor key� simultaneously, then turn the Power off.
· Step 3. Turn the Power on: Set the shutter speed dial to � A �, and then turn the Power on. · Step 4. Display the INITIAL SETTING: 1. Press the Playback button, and then viewing information display. and � RIGHT of Cursor key� simultaneously, turn the Power off. 2. While keep pressing MENU/SET
· Step 5. Set the INITIAL SETTING: Select the area with pressing � UP / DOWN of Cursor key�, and then press the � RIGHT of Cursor key�.
The only set area is displayed, and then press the � RIGHT (The unit is powered off automatically.)
of Cursor key� after confirmation.
4
|
|
|
> |
|