perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 31 (click to view)
Operation
No response when any buttons pressed.
�Some discs prohibit certain operations. �If there is no response at all, the unit may have been affected by
lightning or static electricity. Turn the unit off and on again. Alternatively, turn the unit off, disconnect the power source (AC or battery pack), reconnect the power and turn the unit on again. �Condensation has formed: Wait 1 to 2 hours for it to evaporate. �This unit cannot play discs other than those specified. (5) �Clean the disc. (33)
Play fails to start or stops soon after starting.
�Ensure the disc is inserted correctly. (8) �Check that the disc has something recorded on it. No response when �Check that the batteries are installed correctly. (7) remote control buttons �The batteries are depleted: Replace it with new ones. (7) pressed. �Point the remote control at the remote control sensor and operate. (7)
Cannot add markers. There are already markers. [RAM]
�You cannot add markers while playing a playlist or discs that do not
show the elapsed time. �The unit reads and displays the markers added with a DVD video recorder.
Sound
There is a lot of noise. No sound from the unit�s speaker. No sound from other speakers. Cannot play multi channel surround sound Distorted sound. Piercing noise comes from the speakers.
�Move unit away from mobile phones. �Noise may occur when playing WMA files. �The speaker is off if the LCD is closed or headphones are connected. �Turn up the volume. (8) �Check all connections and settings. (21), (23) �Output is in stereo (PCM) if you have changed the play speed. �This unit plays DVD-Audio in 2 channels. �Turn Advanced Surround off if this occurs. (12) �If you have connected a digital amplifier which does not include a
decoder, be sure to select �PCM� in �Dolby Digital� or �DTS Digital Surround� in �Audio�. (21) Sound effects do not �Dialogue enhancer and Advanced Surround do not work when the unit work. is outputting bitstream signals. (21) �Advanced Surround does not work if you have changed the play speed. (10) �Some audio effects do not work or have less effect with some discs. Cannot record to digital �You cannot record WMA/MP3. recording equipment. �You cannot record DVDs that have protection preventing digital (Incorrect sound recording. recorded.) �You cannot record DVDs if the recording equipment cannot handle signals with a sampling frequency of 48 kHz. �Make the following settings: � Advanced Surround: Off (12) � PCM Digital Output: Up to 48 kHz (21) � Dolby Digital/DTS Digital Surround: PCM (21) FM transmitter does not �FM transmitter does not work when the audio/video cable or work. headphones are connected.
