PANASONIC EP1081
Owner's Manual

CONNECTING TO AUDIOVISUAL EQUIPMENT
ENJOY MUSIC OR A VIDEO WHILE YOU RELAX
The Household Air Massager uses a built-in sonic transducer to create sonic vibrations. By connecting the cables supplied with the Household Air Massager to audiovisual equipment, you can feel sound as vibrations synchronized with the bass of an audio frequency.

SONIC VIBRATION: TURNING ON AND OFF
1. To use the sonic vibration, make sure the �On/Off� switch at the top of the controller is on. Make sure that the operating lamp comes on. 2. If you do not have any audio input, but still want to experience vibration, select the �Vib.� switch. This will go through an approximately 15 minute program of vibrations in your back area. You can change the intensity of the vibration by holding down the up/down arrows on the intensity adjustment buttons. 3. If you are using an audio input (see instructions on page 8 for hooking it up), you can experience vibrations that are synchronized to the lower frequencies of the audio. To experience this, hit the �Sonic Audio� switch. Again, you can adjust the intensity of the synchronized vibrations with the intensity up/down arrows. Sonic vibration intensity is adjustable to different 9 levels. Pressing an adjustment button twice will move the indicator light up or down one position. Automatic timer for sonic vibration �Sonic Audio� is designed to switch off automatically after 75 minutes of continuous use, if no intensity adjustment buttons are pushed during that time. This will be extended by 75 minutes, even after turned off by the timer, by touching the �Sonic Audio� switch. �Vib.� is designed to shut off after approximately 15 minutes, if no intensity adjustment buttons are pushed. Even if automatically turned off, you can easily return to the previous vibration intensity by

In the case of an RCA-type audio output Use the 20-ft cable and connect the minijack to the appliance and the RCA red and white plugs to the audio output of a television, etc.
Television or other audiovisual equipment

In the case of a minijack-type audio output Connect the minijack on one end of the 5-ft cable to the appliance and the other minijack to the audio output of a CD player, etc.
(not included)

Personal CD player

pressing the �Sonic Audio� or �Vib.� switch. If the Air Massager is not operated for approximately 15 minutes after �Sonic Audio� or �Vib.� have been switched off by the timer, the �On/Off� switch will also be automatically switched off.

When the only available audio output is a headphone jack To listen with headphones: Connect the headphone double adaptor jack plug to the headphone jack of a television etc., then use a minijack on one end of the 5-ft cable to connect to the appliance and the other minijack to connect to the headphone double adaptor jack plug.
(not included)

MAINTENANCE
� When cleaning the massager, always unplug first. � When the covering material needs cleaning, gently apply a little liquid soap, wipe with a damp cloth and allow to dry naturally. When plastic parts need cleaning, wipe with a soft cloth dipped in a mixture of lukewarm water and liquid soap. � Do not use paint thinner, benzene or other solvent-based cleaners, as chemical substances may cause discoloration or damage.

Television, computer or other audiovisual equipment

NOTE: 1. Vibratory responsiveness may be inhibited at times due to the signal content of the audiovisual source. 2. Output terminals from audiovisual devices that are monaural cannot be used. 3. If supplied cable length is insufficient, please purchase commercially available stereo cable.

8

9