Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 38 (click to view)
The document has been loaded on the feed tray. But the scanner does not start scanning.
The document is not loaded properly. The sensor cannot detect the document as the edge of the document is curled. The rollers are dirty. The rollers have reached their life expectancy.
Load the document correctly. (See page 17.) Flatten the document and load it again. Clean all of the rollers. (See page 23.) Replace the paper feed roller module and the retard roller module. (See page 27 and page 30.) Flatten the document and load it again after reducing the pages. Make a copy of the document on specified paper (see page 35) and scan the copy. Make a copy of the document on paper of the specified size and scan the copy. Load the document correctly. (See page 17.) Clean the CIS glasses. (See page 25.) Clean the sensor rollers. (See page 25.) Clean the CIS glasses and the sensor rollers. (See page 25.) Adjust the monitor setting. Clean the CIS glasses and the sensor rollers. (See page 25.) Please change the resolution and try to scan.
Double feeding or skewing problems occur frequently or the scanner stops loading while scanning.
The document is curled or folded. The irregular type document is to be scanned. The document has a length of less than 70 mm (2.75z). The document to be scanned was loaded face down (upside down).
The scanned document is blank.
The CIS glasses are dirty. The sensor rollers are dirty. The CIS glasses or the sensor rollers are dirty.
The scanning density is uneven. The color of the scanned document is extremely different from the original document. Dark spots or noise appear on the scanned documents. Scanned image has moire fringes such as stripe or wavy pattern noise.
The setting of the monitor is wrong.
The CIS glasses or the sensor rollers are dirty. It is caused by printing pattern of the document and the congeniality of the scanning resolution.