Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
We received the manual in a timely manner and it was exactly what we were expecting.
Text excerpt from page 155 (click to view)
(From Section 9.5) 2 Item (19)-a Save Setting (Select memory) Select a menu of Setting Item by pushing � (19)-b Save Setting (Memorize scanning condition to EEPROM) Set the parameter by pushing � or � � key. � � or � � key.
(19)-a
Push �
� or �
� key until
19. Save Setting xxxx
is indicated.
xxxx; � Memory 1 � or � Memory 2 � Select Memory Number (1 or 2) to store scanning condition parameters.
No
Renew the scanning Condition?
Yes Select a menu of Setting Item by pushing � � or � � key.
(19)-b
Push �
� or �
� key until is indicated.
19. Save Setting Exec =<>
Pushing �
� and �
� keys at
the same time.
Set new scan condition parameters (for Item 1 to 18 on the Scan Setting Mode) to the selected memory.
(To Section 9.5.1.1) 3
Yes
Change the parameter of another item for Scan Setting Mode? No Push key once.