Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Text excerpt from page 51 (click to view)
Operating Instructions
[Start Capture] : [Start Capture] saves the individual images to the internal memory. Network traffic, PC performance, image quality and image resolution influence [Play] mode time and the refresh interval of the image. The resolution is the same as the current image settings. At a resolution of 320 x 240 in standard, Network Camera stores approximately 560 frames. [Viewer] [Primary] [Secondary] : [Viewer] enables you to view the buffered image by clicking [Start Capture]. : [Primary] enables you to view the buffered image in the primary time in the Alarm/Timer mode. : [Secondary] enables you to view the buffered image in the secondary time in the Alarm/Timer mode.
Notes � � � The refresh interval becomes longer as more clients access Network Camera. The image resolution, image quality and object situation affect the number of frames in the Buffered Image. If internal memory is filled after clicking [Start Capture], the image buffering will stop automatically.
To save still images on your PC The PC can save still images taken by JPEG - Regularly Refresh and Buffered Image. The refresh interval of JPEG - Regularly Refresh should be 30 seconds or more in saving the image. To save the image, place the cursor on the image and click the right button of the mouse. Then select "Save Picture As...". Enter a picture name and save. Note The PC cannot save Motion JPEG and [Play] mode images of Buffered Image.
