Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Manual was complete and available promptly, since I had lost my original manual. Very good response.
Text excerpt from page 22 (click to view)
Useful Telephone Settings 6 Press {C}. 7 Press {>}, then press {ih}. Storing emergency numbers
This feature determines which phone numbers may be dialled while the call bar feature is turned on. A total of 4 emergency numbers (memory locations 1�4) can be stored.
5 Press {*}. 6 Press {>} repeatedly to display the
desired number.
7 Press {C} and enter the new emergency
number.
8 Press {>}. 9 Press {ih}. Resetting the base unit to its default settings 1 Press {j}. 2 Press {v} repeatedly to display
�SETTING BS�, then press {>}.
4 Enter �0000� (default base unit PIN).
L If you changed PIN, enter it (page 20).
5 Press {*}. 6 Enter the emergency number (8 digits
max.). L If you enter a number when an emergency number is already displayed, the new number will erase the old number. L To select a different memory location, press {>} repeatedly and enter a number.
3 Press {0}. 4 Enter �0000� (default base unit PIN).
L If you changed PIN, enter it (page 20).
5 Press {>}, then press {ih}.
Note: L For the default settings, see page 20. L The emergency number setting will not be reset.
7 Press {>}. 8 Press {ih}.
Note: L The default setting for emergency numbers are stored in the first 3 memory locations. It is recommended that you do not overwrite these numbers. Changing stored emergency numbers
1 Press {j}. 2 Press {v} repeatedly to display
�SETTING BS�, then press {>}.
3 Press {6}. 4 Enter �0000� (default base unit PIN).
L If you changed PIN, enter it (page 20).