First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
Text excerpt from page 48 (click to view)
KX-TG1032B/KX-TGA101B
9.5.
9.5.1.
How to Replace the LLP (Leadless Leadframe Package) IC
Preparation
� PbF (: Pb free) Solder � Soldering Iron Tip Temperature of 700°F ± 20°F (370°C ± 10°C) Note: We recommend a 30 to 40 Watt soldering iron. An expert may be able to use a 60 to 80 Watt iron where someone with less experience could overheat and damage the PCB foil. � Hot Air Desoldering Tool Temperature: 608°F ± 68°F (320°C ± 20°C)
9.5.2.
Caution
� To replace the IC efficiently, choose the right sized nozzle of the hot air desoldering tool that matches the IC package. � Be careful about the temperature of the hot air desoldering tool not to damage the PCB and/or IC.
9.5.3.
How to Remove the IC
1. Heat the IC with a hot air desoldering tool through the P. C. board.
2. Pick up the IC with tweezers, etc. when the solder is melted completely. Note: � Be careful not to touch the peripheral parts with tweezers, etc. They are unstable.
When it is hard to melt the solder completely, heat it with a hot air desoldering tool through the IC besides through the P. C. board.
3. After removing the IC, clean the P. C. board of residual solder.
