|
Who's Online
There currently are 5718 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Complete manual included schematics layouts and alignment procedure, clear to read and magnify, extremely pleased with manual and owner manual . com's service
;
perfect, i am very satisfait for the réception of the sansui r-5l service manual, thank you very much
;
Thank you, this is a rare document. Few others have it, but they charge way more for a download.
Great deal (even if you have to wait a few hours to get it).
;
The purchased manual is an high quality scan of the original Philips paper-based Service Manual. I am very satisfied!
;
The purchased manual is an scan of the original Panasonic paper-based Service Manual. Unfortunately the contrast is not perfect, but I am satisfied anyway!
MC-UL862-00
4. Once left side has cleared, remove nozzle housing from motor shaft.
4. Replace motor support cover and motor case. Secure with four (4) screws that were removed earlier. 5. Reinstall dust cover as outlined in Dust Cover Removal and Replacement section.
3.6.
3.6.1.
Lower Plate Replacement
Removal
1. Place the Carpet/Bare Floor pedal in the carpet position and the handle in the upright position. 2. Turn the vacuum cleaner over exposing the underside. Release lower plate by pressing two (2) latches and two (2) locking tabs inward as shown.
3.5.2.
Installation
1. Fit the nozzle from the motor shaft side first, and rotate it into place on the dust container. 3. Remove the lower plate and remove any residue that may exist in the belt area.
3.6.2.
Installation
1. Reinstall lower plate by hooking front end of lower plate into slots on front of nozzle housing.
2. Rotate nozzle shaft into groove on dust container. 3. Place floor nozzle spring into slot on dust compartment.
2. Press lower plate until locking tabs snap into place then push the two (2) latches outward.
12
|
|
|
> |
|