We received the manual in a timely manner and it was exactly what we were expecting. Excellent replacement for original Service Manual.
All schematics are very legible. We are really satisfied.
Text excerpt from page 17 (click to view)
5.6. Turntable motor 1. Remove the motor cover by cutting at the locations indicated by the arrows with a cutter.
After removing the motor cover, be sure that cut portions are properly trimmed or bent to the inside so that no sharp edges will be exposed to outside. 2. Disconnect 2 lead wires connected to the turntable motor. 3. Remove the turntable motor by removing screw.
After replacing the new turntable motor and reconnecting the two lead wires, reinstall the motor cover by rotating it 180Â°, tucking the tabs into the base in the 2 provided slots, then screw the single tab to the base using a 4mm X 6mm screw (not provided). /