Very pleased with manual except that a few more details in the drawings might make the job (not yet done, tut-tut) easier. Should be adequate though. Actually I didn't have to pay for this anyway as I was given credit for another item that wasn't quite complete. Good service, then.
Hi - happy with what I received but not quite what I wanted - my fault I assumed that service manual would also include operational instructions which is what I needed - all I needed to know was how to turn the radio - thanks
Text excerpt from page 22 (click to view)
PROCEDURES Press the FF and EJECT keys simultaneously for 3 seconds. Press the FF and EJECT keys simultaneously more twice. Press the EJECT key for 3 seconds.
Insert the Alignment Tape. (PAL: VFJ81215H3F) (NTSC: VFM8080HQFP) This adjustment is automatically started. (During the adjustment, the picture will be appeared on the monitor.) When this Adjustment is terminated, the following operation will be activated. -Adjustment completed: The tape will be ejected. -Adjustment incompleted: "F2*" is indicated on the FIP.Check the
Servo/System Control circuit and Cylinder Unit.
To release Service Mode, press the FF and EJECT keys. simultaneously 6 times until the normal indication on the FIP.
5. INPUT/OUTPUT CHART
5.1. INPUT/OUTPUT CHART FOR IC6001