Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
Text excerpt from page 40 (click to view)
Reassembly Notes for Mirror: Install the Mirror as following procedures. 1) Peel the Protection Sheet approx. 20 mm (maximum 22 mm) from the top and bottom edges of the Mirror to place the Sheet. Then, place the 4 sheets on the top and bottom edges of the Mirror as shown.
Top edge of Mirror Sheet
Mirror support bracket
Bottom edge of Mirror
<Front View> Fig. D5-3-1
Fig. D5-3-2 Top Mirror Plates 2) When handling the Mirror, do not touch the Mirror surface. Be sure to hold the sheet portions of the Mirror. 3)
CAUTION: Insert the Mirror from the top into the lower slots (For model with 40 inch Mirror) or into the upper slots (For model with 45 inch Mirror) of the Back Panel carefully avoiding the Mirror Support Brackets. Otherwise, the Mirror may crack. Then, the Mirror is secured with the Mirror Support Brackets.
Mirror (Protection Sheet)
Upper Slots (for model with 45 inch Mirror) Lower Slots (for model with 40 inch Mirror)
4) Install the 2 Top Mirror Plates on the Mirror and tighten the 4 Screws. 5) Peel the Protection Sheet from the Mirror.