|
|
|
Who's Online
There currently are 5362 guests and
1 member online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very quick response. Very good and accurate print quality of the scanned document.
 ;
The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
;
Excellent manual. Helped me out with disassembling and troubleshooting my projector.
;
thanks you are the best.Very good detail, Quick service response. A useful service manual with all details.
;
Great service!!! Polecam gorąco wszystkim zainteresowanym
PT-56DLX76-K / PT-61DLX76-K /
a. Focus Adjustment
1) Press the CH UP/DOWN key on the remote to select "DDP3021" on menu and press the ASPECT key 8 times to select "Focus pattern (SPA OFF)." 2) Confirm that each of the pixels in the center is clearly visible.
b. Verifying the Smooth Picture Gain Adjustment on the screen
1) Press the ASPECT key once from "Focus pattern" to select "Smooth picture pattern" in DDP3021. 2) Confirm that each set of R, G, B lines is straight. 3) If not, press any key to release this mode and adjust with the following procedure. (In DDP3021 mode, this adjustment cannot be performed.) 4) Press the CH UP/DOWN key on the remote to select "SP GAIN ADJUST" on Other menu and press the ASPECT key on the remote. 5) Adjust SP GAIN ADJUST so that each R, G, B line is straight by holding down the VOLUME UP/DOWN key to change the value.
<Focus pattern>
<Smooth picture pattern> straight straight straight
3) If not, loosen the Knob on the Projection Lens until the Knob can be moved.
Tighten Knob
OK NG
6) After adjusting, press the ASPECT key to return to Other menu. Note: While adjusting, do not press the RECALL key on the remote. Otherwise, the screen may be reflected or frozen. If this occurs, turn off the power and re-adjust.
Loosen
Up
Down
<Front View>
Fig. M1-5 4) Adjust the Knob by moving up or down so that each of the pixels in the center is clearly visible to obtain the best focus. 5) Tighten the Knob.
81
|
|
|
> |
|
