I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Note for Service Position: 1. The optical parts will be exposed to the dust in the air when the Top Duct Unit is removed. It is strongly recommend that it should be done in a clean room. 2. When there is no picture output, it is necessary to connect LCD Panel Flat Extension Cables (LSUA0042), Relay PCBs (LSEP3112A) and the 7 Pin Extension Cable (LSUA0063). 3. When changing the input mode, point the remote at IR receiver on the Front Jack/Operation P.C.B. 4. When performing Polarizer adjustment, project the picture onto the white screen so that the picture is within the limits of the Screen as shown.