Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
Text excerpt from page 11 (click to view)
PT-AE700U / PT-AE700E
6.2.
Removal of Upper Case
1. Remove the cap of the lens shift lever.
3. Unscrew the 2 screws and remove the A-P.C.Board block.
2. Unscrew the nut in the shift lever. Note: · Turn clockwise the nut to unscrew.
4. Unscrew the 7 screws and remove the connector plate.
3. Turn counterclockwise the shift lever and remove it. 4. Turn the projector upside down. 5. Unscrew the 7 screws.
6.4.
Removal of S-P.C.Board
1. Remove the upper case according to the section 6.2. "Removal of Upper Case". 2. Unscrew the 2 screws and remove the S-P.C.Board.
6. Return the projector to the normal position. 7. Remove the upper case.
6.3.
Removal of A-P.C.Board 6.5. Removal of J-P.C.Board (PTAE700E only)
1. Remove the upper case according to the section 6.2. "Removal of Upper Case". 2. Unscrew the 3 screws and remove the connector cover.
1. Remove the upper case according to the section 6.2.
