perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 12 (click to view)
Quick Guide
1
1 Charge the Battery. (l 18)
�Connect the AC Cable to the AC Adaptor and plug it into the AC Wall Outlet. �Attach the Battery to the AC Adaptor. (This will start the charging process.) �The [POWER] Lamp and [CHARGE] Lamp light up, and charging starts. When the [CHARGE] Lamp goes off, charging is completed. �Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it. Attach the Charged Battery to the Palmcorder. (l 18)
OPEN /
2
2
3 1
EJECT
3 Insert the Cassette. (l 20) �Slide the [OPEN/EJECT] 1 Lever toward the front and pull
down to open the Cassette Compartment. �Insert the Cassette. �Press the [PUSH] mark 2 to load the Cassette. �Close the outside compartment Cover.
2
PUSH
4
CAMERA VCR CARD PB
OFF
ON MOD E
4 Start recording. (l 28)
�Turn the Palmcorder on. (l 20) �Rotate the Switch 3 to [ON]. (The [CAMERA] Lamp lights up.) �Press the 4 Button. (Recording starts.) �Press the 4 Button again to pause the recording.
4 5, 6
CAMERA VCR CARD PB
OFF ON MODE
3
To View the Playback Picture
5 Switch to the VCR Mode, rewind the tape, and play
9
the tape back. (l 43)
�Set the 5 Switch to VCR mode. (The [VCR] Lamp lights up.) �Press the 6 Button. (Rewind the tape.) �Press the 7 Button. (Playback starts.) �Press the 8 Button. (Playback stops.)
5
6 Turn the Palmcorder off. (l 20) �Set the 9 Switch to [OFF].