I'm very satisfied with your manual service. Your website made it easy to locate the correct manual. Also the quality is great and I never had a problem reading the fine details.
Thanks again.
Jeff Miller
JM Electronics
Good quality service manual German user manual. German user manual This is a quality scan of a manual in excellent condition and is just as good as having the original manual in hand
The manual for Sony LBT-D505 component stereo system is was excellent , with schematics, parts layout and parts list as well as instructions for adjustments for each component. Print was clear even when enlarged.
I searched EVERYWHERE looking for the manual/s on this "extinct" amp. Owner-Manuals.com made it available and for nearly nothing. Thanx to them, I can decipher the unknown cables and sort them out. Thanx, Owner-Manuals.com!!
Text excerpt from page 66 (click to view)
SA-PT950P / SA-PT950PC
Caution: Handle the heatsink unit D with caution due to its high temperature after prolonged use. Touching it may lead to injuries.
Caution: Handle the small heat sink with caution due to its high temperature after prolonged use. Touching it may lead to injuries.
Note : Refer to the diagrams of SMPS P.C.B. (Item 10.18.) for location of the parts.
Note : Refer to the diagrams of SMPS P.C.B. (Item 10.18.) for location of the parts.
10.24. Disassembly of Tray Guide (L) & Tray Guide (R)
· Follow (Step 1) to (Step 3) of Item 10.3. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. Step 1 Remove 2 screws from the tray guide (L) and the tray guide (R) . Step 2 Remove the tray guide (L) and the tray guide (R) in the direction of arrow.
10.23. Disassembly of Regulator Diode (D5702)
· Follow (Step 1) to (Step 3) of Item 10.3. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. · Follow (Step 1) to (Step 7) of Item 10.18. Step 1 Desolder pins of the regulator diode (D5702) on the back side of SMPS P.C.B.
10.25. Disassembly of Rotary Tray
· Follow (Step 1) to (Step 3) of Item 10.3. Step 2 Remove 1 screw. Step 3 Remove the regulator diode (D5702) from the small heat sink. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. Step 1 Remove the screw and the tray spring. Step 2 Remove the rotary tray in the direction of arrow. 66