Excellent service from Owner-Manuals.com, good prices and quick turn around. The supplied PDF was good enough quality to be enlarged sufficiently to read component values.
Very complete shop manual. It contains everything needed to troubleshoot bascially any problem. Instructions, diagrams, schmeatics, illustrations... it's all there. Highly recommended!
Great product, very good quality, found all needed information. Thanks
Text excerpt from page 55 (click to view)
SA-PT960P / SA-PT960PC
Step 2 Screw the TR spring to the heatsink unit A. Step 3 Use a blower to remove the minute particles that might be caused after the process of the screwing TR spring to the heatsink unit A.
9.15. Replacement of Digital Amp IC (IC5200)
� Follow (Step 1) to (Step 3) of Item 9.3. � Follow (Step 1) to (Step 2) of Item 9.14. Step 1 Desolder pins of the digital amp IC (IC5200) on the reverse side of D-Amp P.C.B. Step 4 Solder pins of the digital amp IC (IC5000) on the reverse side of D-Amp P.C.B.
Step 2 Remove 1 screw. Special Note: Ensure pins of the digital amp IC (IC5000) are properly seated and soldered on D-Amp P.C.B. Step 5 Position the bottom chassis portion into the curves according to the diagram shown. (Rotate the part at 180 degrees as compared to its original position) Step 6 Screw the portion to the bottom chassis. Step 3 Remove the TR spring in the direction of arrows. Step 4 Remove the digital amp IC (IC5200) from the heatsink unit A. Caution: Handle the heatsink unit A with caution due to its high temperature after prolonged use. Touching it may lead to injuries.