Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
helpful manual.good service.Quick response.will use again
Text excerpt from page 20 (click to view)
Changing sound field and quality
» quality A
SC-EH760 MULTI JOG
Changing sound field and
Changes to sound field and quality have no effect on recordings.
[SC-EH760]
Turn [MULTI JOG] to select a setting.
[SC-EH560]
Press [EQ] to select a setting.
2
SC-EH560
13
EQ
Each time you turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560): HEAVY: Adds punch to rock. CLEAR: Clarifies higher sounds. HALL: Expands sound to make you feel like you were in a hall. AI-EQ: Adjust sound with the acoustic image equalizer (¬ page 21). M.EQ: Create your own effects (¬ see below). FLAT: Canceled (no effect is added).
2
A
SC-EH760 SC-EH560
MULTI JOG
EQ
13
On the remote control
Press [EQ]. Note Turn off the effect if sound quality reduces when using HALL or 3D AI EQ with a source.
(On the tuner amplifier)
(On the sound processor)
SC-EH760
FLAT HEAVY CLEAR
HALL AI-EQ M.EQ
SC-EH560
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
» B
Using the manual equalizer
[SC-EH760]
Create your own sound quality effects.
1
B
Turn [MULTI JOG] to select �M.EQ�.
[SC-EH560]
MULTI JOG
1 2 3
1
Press [EQ] to select �M.EQ�.
(On the sound processor)
EQ
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
2
Press [3D AI EQ/M.EQ BAND] to select the band.
Each time you press the button: LOW>MID>HIGH ^------------------------}
3D AI EQ/ M.EQ BAND
(On the tuner amplifier)
3
2
MULTI JOG
MULTI CONTROL
1 Select the frequency you want to use as the peak with [", !]. 2 Adjust the level of the peak with [#, $]. ³Adjacent frequencies are adjusted at the same time to maintain a smooth curve. ³When you have adjusted the curve, you can move the peak of the curve by pressing [", !] (a). (On the sound processor)
MID
Use [", !, #, $] to make the required curve.
1 2 1
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
Repeat steps 2 and 3 to adjust the three bands. The original display is restored on the display panel in about 5 seconds.
To cancel
Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select �FLAT�.
LOW
HIGH
2
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
a
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
Note ³The changes you make are stored and automatically recalled the next time you select �M.EQ�. ³After making a curve in one band, any adjustments in another band make a curve that is a combination of the two.
[C] To flatten the curves in all three bands
Set the frequencies b in LOW, c in MID, and d in HIGH to flat.