|
Who's Online
There currently are 5690 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
;
Welcome. The scheme is clearly helped me to repair. Worth to download it.
;
Excellent manual, very clear, technical specification provided, useful information regarding adjustment and set up.
;
fast and easy and exactly what I was looking for. Not the cheapest but value for money after all.
;
The manual for the Sansui P-L75 was not one of the more informative turntable manuals around but for $5 it was helpful enough.
Name of measuring instrument RF generator Base Band generator Adjustment of AV system
Connection
Remarks
Remarks
1. Receive AV1 (PAL-M or NTSC 100% Full White or Split Colour bar shown as below).
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512. (It checks that an initial value is a default) 3. The colour key yellow button of remote control is pushed. 4. The OSD character of sub-contrast becomes red. (Inside under automatic adjustment) 5. The OSD character of sub-contrast returns to white. 6. End.
Adjustment of RF system
1. Receive a RF. (PAL-M or NTSC 100% Full White or Split Colour bar shown as below).
Remarks
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512. (It checks that an initial value is a default) 3. The colour key yellow button of remote control is pushed. 4. The OSD character of sub-contrast becomes red. (Inside under automatic adjustment) 5. The OSD character of sub-contrast returns to white. 6. End.
Adjustment of HD system
1. Recieve Component (1080i/ 60Hz or 1080i/ 50Hz, 100% Full White or Split colour bar as shown below).
Remarks
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 384. (It checks that an initial value is a default) 3. The colour key yellow button of remote control is pushed. 4. The OSD character of sub-contrast becomes red. (Inside under automatic adjustment) 5. The OSD character of sub-contrast returns to white. 6. End.
4. Conductor Views
4.1. TU-Board 4.2. DG-Board
5. Schematic and Block Diagram
5.1. Schematic Diagram Note
12
|
|
|
> |
|