Bon produit. Permet de corriger les couleurs et de redonnez un petit coup de jeune à vos vieilles vidéos. On regrettera juste le manque d'une prise s-vidéo.
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
Text excerpt from page 24 (click to view)
7.22. Remove (Squawker)
the
Speaker
7.24. Remove the K-Board and SBoard
1. Remove the Cabinet assy. (See section 7.21.) 2. Remove the Speaker (Squawker /L). (See section 7.22.) 3. Remove the screws (�3 ,�1 ) and remove the Bottom shield L and the S-Board shield plate.
1. Remove the Cabinet assy. (See section 7.21.) 2. Disconnect the relay connectors. 3. Remove the screws (�2 each). 4. Remove the Speaker (Squawker/L, Squawker/R).
7.23. Remove the GL-Board
1. Remove the Cabinet assy. (See section 7.21.) 2. Remove the Speaker (Squawker /R). (See section 7.22.) 3. Remove the screws (�3 shield R. ) and remove the Bottom
4. Remove the screws (�2 ). 5. Disconnect the connector (K1) and remove the K-Board.
6. Remove the screws (�2 unit. 4. Disconnect the connector (GL02). 5. Remove the screws (�2 ) and remove the GL-Board.
) and remove the S-Board
7. Disconnect the connector (S2). 8. Remove the screws (�1 ) and remove the S-Board.