I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
Text excerpt from page 24 (click to view)
bottom of the cabinet assy forward, lift, and remove.
7.25. Remove the K-Board and SBoard
1. Remove the Cabinet assy. (See section 7.24.) 2. Remove the screws (�2 Board shield. ) and remove the K and S-
3. Remove the screws (�3 Board unit.
) and remove the K and S-
4. Remove the spacers and spacer rings (�6
).
4. Disconnect the connector (S2). 5. Remove the screws (�2 ) and remove the S-Board.
6. Disconnect the connector (K1). 7. Remove the screws (�1 ) and remove the K-Board.