I AM HIGHLY IMPRESSED BY THE EASE OF USE OF THIS DOWNLOAD SERVICE. INSTRUCTIONS ARE CLEAR AND SIMPLE TO FOLLOW....EVEN BY TECHNOPHOBES SUCH AS MYSELF. THE EMAILS POINT YOU IN THE RIGHT DIRECTION...ITS SO EASY PEASY. THE DOWNLOAD CHOICE OF USER MANUALS IS EXTENSIVE AND I COULD NOT FIND A CHEAPER OR MORE EFFICIENT SERVICE ON THE INTERNET. I COULD NOT HAVE MADE A BETTER CHOICE OF INFORMATION PROVIDER. SHOULD I EVER NEED ANOTHER USER MANUAL, THEN THIS IS THE FIRST CHOICE SITE. COULD NOT BE BETTER PLEASED!!!!!!!...MANY THANXES FROM JIM BURNS
I was impressed with the quality of service (frequent e-mails to let you know the status of your order), and the speed at which the download became available. The manual was a life saver and was not easy to track down. Thank you for such an excellent service.
the manual was just what i wanted it had all the revelent information required to operate the hifi .Iwould use any manual i downloaded for any item which needs a manual
GOOD SERVICE MANUAL GOT ALL THE INFO. THAT I NEEDED..
Text excerpt from page 8 (click to view)
Accessories/Options
2
Setting-up
Television unit Lift the television unit above the pedestal base, with the back of the display unit on the same side as the Label. Then align the holes in the television unit with the poles of the pedestal and lower the television unit into place. Use the assembly screws B (M5 x 30) to fasten securely.
* Carry out work on a horizontal and level surface.
B B
Rear Label
Pedestal
3
Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
For 37'', 42'', 50'' Plasma television
Accessories for pedestal security
1 Band (2) 2 Screw (2) 3 Wood screw (2) 4 Clamp (2)
Nominal diameter 4 mm x 12
â� Securing to a base
â� Securing to a wall
* Remove the screws at both top corners on the rear side of the plasma TV, and attach the clamps 4 to the plasma TV using the removed screws.
Front
Screws on main body
Front
Securing method D * Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar.
Wood Worktop
Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws.
