|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Having bought a pre-owned Sony FM stereo tuner through eBay, it came without any manuals. It soon became clear that to get the best from this excellent tuner I needed a decent manual because much of the operation was not intuitive to a newboy to hi fi like me. I managed to download the official Sony multi-lingual manual from Owner-Manuals.com with no problem at all - a really quick and easy service. I'm very glad I did because I found out all the operations of the tuner and was then able to not only set it up quickly but also to get much more from it that poke-and-hope trialling would ever achieve. In my book $4.99 very well spent.
;
This manual is immaculate in it's accuracy. Everything is written very clearly and easy to understand. Written by a professional who wants to convey a clear and easy to understand message!!
;
This Manual (as downloaded) is both informative and comprehensive and has proved to be extremely useful. thoroughly recommended.
;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
OPERATING PROCEDURES
MONITOR CONTROL FUNCTION
Before starting the following procedures, all system components should be turned on. Then set the LOCK switch to the OFF position.
s Operating the Multiscreen Monitor
The following operations are available on the Multiscreen Monitor. Note: We recommend to use the Single Spot when displaying non-interlace pictures, for instance, the Menu screen of the WJ-SX550, to prevent picture disturbance.
s Operating the Spot Monitor
The following operations are available on the Spot Monitor.
q Displaying the Camera Picture
1. Single Spot
1. Press the MULTISCREEN button. The LED (green) on the button lights up.
MULTI SCREEN
q Displaying the Camera Picture
1. Single Spot
1. Press the SPOT button. The LED (green) on the button lights up.
SPOT
2. Press a CAMERA (1 - 16) button to display a selected camera picture on the monitor screen. The LED on the selected CAMERA button lights up.
2. Press the VCR/CAM button to CAM position (LED off).
VCR CAM
3. Press a CAMERA (1 - 16) button to display a selected camera picture on the monitor screen. The LED on the selected CAMERA button lights up.
ENTRANCE
2. Single Still
1. Repeat the step 1 - 3 described above for Single Spot. 2. Press the STILL button to freeze the displayed picture.
2. Spot Sequence
1. Press the SPOT button. The LED (green) on the button lights up. 2. Press the SEQUENCE button to activate the sequence (SEQ1) programmed.
SEQUENCE
STILL
The LED on the SEQUENCE button lights up. Note: Refer to the Sequence Setup on page 31 for more details. 3. Press the SEQUENCE button to move one step forward in the sequence. 4. To cancel the sequence, press the respective CAMERA button again. The selected camera picture is displayed in spot mode. -38-
STILL
The LED on the STILL button lights up, and the LED on the pressed CAMERA button starts to blink. The camera title and �STILL� (both blinking) alternate in the display. 3. To cancel the still picture, press the STILL button again. The selected camera picture is displayed in spot mode.
|
|
|
> |
|
