|
|
|
Who's Online
There currently are 5774 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
� PIX OFF Setting (PIX OFF) In this setting, you can assign a blemish position and compensate the blemish. 1. Move the cursor to PIX OFF and press the CAM (SET) key. The PIX OFF menu appears.
** PIX OFF ** 1* 5* 2* 6* 3* 7* 4* 8
** SPECIAL2 ** CHROMA GAIN � ����|����+ AP GAIN � ����|����+ PEDESTAL � �|�������+ HUE �����|����+ RESOLUTION NORMAL DNR LOW2 BW MODE PIX OFF REFRESH �PUSH SET CAMERA RESET �PUSH SET RET
000 000 RET
For WV-RM70, hold down the right and left buttons simultaneously for 2 seconds or more. For WV-CU360C/CJ and WV-CU161C, hold down the [4] and [6] keys simultaneously for 2 seconds or more. � Camera Resetting (CAMERA RESET) Move the cursor to CAMERA RESET with the joystick and press the F3 button of WV-CU550C/CJ.
** SPECIAL2 ** CHROMA GAIN � ����|����+ AP GAIN � ����|����+ PEDESTAL � �|�������+ HUE �����|����+ RESOLUTION NORMAL DNR LOW2 BW MODE PIX OFF REFRESH �PUSH SET CAMERA RESET �PUSH SET RET
2. Select a number and press the CAM (SET) key. The blemish compensation appears. position setting screen
Move the joystick to place the "+" cursor on the blemish position. After moving the "+" cursor to a position where the blemish looks inconspicuous, press the CAM (SET) key. Consequently, the blemish compensation position is set up and the PIX OFF menu is restored. After a blemish compensation position is set up, "*" is attached at the right of the number. 3. If you would like to delete a blemish compensation position, move the cursor to the applicable number and press the CAM (SET) key.
The camera is reset to the factory default settings. For WV-RM70, hold down the right, left and set switches simultaneously for 2 seconds or more. For WV-CU360C/CJ and WV-CU161C, hold down the [4], [5] and [6] keys simultaneously for 2 seconds or more. Note: In case of performing this operation on the condition that the cursor is positioned on other than CAMERA RESET, you cannot perform the operations on the menu thereafter. In that event, set the camera menu to ON again with the controller referring to page 12. � To Close the SPECIAL2 Menu Move the cursor to RET and press the CAM (SET) key. The setup menu appears on the monitor screen.
** SPECIAL2 ** CHROMA GAIN � ����|����+ AP GAIN � ����|����+ PEDESTAL � �|�������+ HUE �����|����+ RESOLUTION NORMAL DNR LOW2 BW MODE PIX OFF REFRESH �PUSH SET CAMERA RESET �PUSH SET RET
+
The blemish compensation position setting screen appears. Press the F2 button of WV-CU550C/CJ when the setting screen is active. For WV-RM70, hold down the right and left buttons simultaneously for 2 seconds or more. For WV-CU360C/CJ and WV-CU161C, hold down the [4] and [6] keys simultaneously for 2 seconds or more. The screen is restored to the PIX OFF menu, the blemish compensation position is deleted and "*" is also deleted from the right of the number.
� To Restore the Camera Default Position (REFRESH) Move the cursor to REFRESH with the joystick and press the F2 button of WV-CU550C/CJ.
Reset to the Factory Default Settings Any of the above settings plus the ALC/MANUAL level control and phase adjustments can be reset to the factory default settings by placing the cursor over the desired mode and then pressing the F2 button of WVCU550C/CJ. -42-
|
|
|
> |
|
