|
Who's Online
There currently are 5717 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
UNIT SELECTION
To control the system, you need to select a desired unit (system unit, recorder, monitor, or camera) at the beginning.
I Recorder Selection
Notes: � In advance, you need to set HDD-unit maps. (Refer to p. 78 Associating Recorder Numbers with Unit Numbers.) � In the factory default, Recorder 1 to 16 is associated with Unit 1 to 16. 1. Enter a recorder number by pressing numeric buttons. The entered number will appear on the LCD.
I System Unit Selection
Notes: � In advance, you need to set the unit number for each system unit. (Refer to the operating instructions of system units.) � 1 to 99 are available for the unit number. 1. Enter a unit number by pressing the numeric buttons. The entered number will appear on the LCD.
Mon02 Cam128 F1 F2 F3
____2 F4
Mon01 Cam016 F1 F2 F3
___16 F4
2. Press the RECORDER/UNIT button. The system will become ready for control, and the monitor number, camera number, and system unit number will appear on the LCD.
2. Press the RECORDER/UNIT button while holding down the SHIFT button. The system will become ready for control. Then, the monitor number, camera number, and system unit number will appear on the LCD.
Mon02 Cam016 Unit16 F1 F2 F3 F4
Notes: � Three seconds after, model number will appear in place of unit number.
Mon02 Cam016 F1 F2 F3
Unit16 F4
Note: Three seconds after, model number will appear in place of unit number. To display the unit number again, hold down the RECORDER/UNIT.
Mon02 Cam016 F1 F2 F3
HD316 F4
Mon02 Cam016 F1 F2 F3
HD316 F4
� If you have entered a wrong recorder number, �Invalid� will appear on the LCD. Then, the LCD will return to the status before the recording selection.
� If you have entered a wrong unit number, �Invalid� will appear on the LCD. Then, the LCD will return to the status before the system unit selection.
Invalid
Invalid
41
|
|
|
> |
|